Flight; Flight Environment Requirements; Flight Limits And Geo Zones - dji MINI 2 User Manual

Flight

Once pre-flight preparation is complete, it is recommended to hone your flight skills and practice flying
safely. Make sure that all flights are carried out in an open area. The flying height is limited to 500 m. DO
NOT exceed this height. Strictly abide by local laws and regulations when flying. Make sure to read the
DJI Mini 2 Disclaimer and Safety Guidelines to understand the safety notices before flying.

Flight Environment Requirements

1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 10 m/s, snow,
rain, and fog.
2. Only fly in open areas. Tall structures and large metal structures may affect the accuracy of the
onboard compass and GPS system. It is recommended to keep the aircraft at least 5 m away from
structures.
3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water. It is recommended to
keep the aircraft at least 3 m above water.
4. Minimize interference by avoiding areas with high levels of electromagnetism such as locations near
power lines, base stations, electrical substations, and broadcasting towers.
5. Aircraft and battery performance is subject to environmental factors such as air density and
temperature. DO NOT fly the aircraft 4,000 m (13,123 ft) or higher above sea level. Otherwise, the
battery and aircraft performance may be reduced.
6. Aircraft cannot use GPS within the polar regions. Use the Downward Vision System when flying in
such locations.
7. Fly with caution when taking off from moving surfaces such as a moving boat or vehicle.

Flight Limits and GEO Zones

Unmanned aerial vehicle (UAV) operators should abide by the regulations from self-regulatory
organizations such as the International Civil Aviation Organization, the Federal Aviation Administration,
and local aviation authorities. For safety reasons, flight limits are enabled by default to help users
operate this aircraft safely and legally. Users can set flight limits on height and distance.
Altitude limits, distance limits, and GEO zones function concurrently to manage flight safety when GPS
is available. Only altitude can be limited when GPS is unavailable.
Flight Altitude and Distance Limits
The flight altitude and distance limits can be changed in DJI Fly. Based on these settings, the aircraft will
fly in a restricted cylinder as shown below:
Max Flight Altitude
Height of aircraft
when powered on
Max Radius
Home Point
©
2021 DJI All Rights Reserved. 39