Table of Contents
Advertisement
DJI Mini 2 User Manual
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas are
positioned in relation to the aircraft as depicted below.
Optimal Transmission Zone
Linking the Remote Controller
The remote controller is linked to the aircraft before delivery. Linking is only required when using a new
remote controller for the first time. Follow these steps to link a new remote controller:
1. Power on the remote controller and the aircraft.
2. Launch DJI Fly.
3. In camera view, tap
continually.
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once
to indicate it is ready to link. The aircraft beeps twice to indicate linking is successful. The battery
level LEDs of the remote controller will glow solid.
Make sure the remote controller is within 0.5 m of the aircraft during linking.
The remote controller will automatically unlink from an aircraft if a new remote controller is linked to
the same aircraft.
Turn off Bluetooth and Wi-Fi when using OcuSync 2.0 video transmission connection. Otherwise,
they may affect the video transmission.
Fully charge the remote controller before each flight. The remote controller sounds an alert when the
battery level is low.
If the remote controller is powered on and not in use for five minutes, an alert will sound. After six
minutes, the aircraft automatically powers off. Move the control sticks or press any button to cancel
the alert.
Adjust the mobile device holder to make sure the mobile device is secure.
Fully charge the battery at least once every three months to maintain battery health.
©
32
2021 DJI All Rights Reserved.
and select Control and Pair to Aircraft (Link). The remote controller will beep
Weak
Weak
Strong
Hide quick links:
Advertisement
Table of Contents
