Combination operation
3.3 Gas connections
Note
Equipping analyzer modules with restrictors and/or clamping screws
In the delivery state, the analyzer modules are equipped as follows at the factory:
● OXYMAT 7: Sample gas restrictor at the sample gas inlet, otherwise clamping screws
everywhere
● ULTRAMAT 7 are not equipped with clamping screws or sample gas restrictors.
Subsequent upgrading or retrofitting is not possible and not required.
● CALOMAT 7: Clamping screws only.
3.3.2
Sample gas restrictors/clamping screws
Overview
①
②
③
Figure 3-3
26
Sample gas bushing with 6 mm connection fittings, version with pipes
Sample gas restrictors
Sample gas bushing with 6 mm connection fittings, version with hoses
Sample gas connections with sample gas restrictors
Compact Operating Instructions, 05/2015, A5E31805656-03
Quick Start