Table Of Contents - Angelo Po 1G0TP0 Use And Installation Manual

st
1 PART
nd
2 PART
A
Adjusting gas control valve minimum
setting, 15
Adjustments, recommendations for, 15
Appliance and constructor, identifica-
tion, 2
Appliance, decommissioning, 17
Appliance, general description, 3
Appliance, installation, 11
Appliance, lengthy downtimes, 7
Appliance, testing, 13
Appliances in banks, assembly, 11
Assembly appliances in banks, 11
B
Burner air bushing, replacing, 17
Burner nozzle, replacement, 16
Burner, replacing air bushing, 17
Burner, switching on and off, 6
C
Checking gas pressure, 8
Cleaning the plate, 8
Cleaning, recommendations for, 7
Connection, gas, 11
Constructor and appliance, identification,
2
Controls, description, 6
Conversion of gas supply, 12
D
Decommissioning the appliance, 17
Description of controls, 6
F
Faults, troubleshooting, 9
Flue deflector, installation, 14
G
Gas control valve minimum setting,
adjustment, 15
Gas control valve, adjusting minimum
setting, 15
Gas pressure, checking, 8
Gas supply, conversion, 12
CONTENTS
ref. chapters
0 INFORMATION FOR THE READER .................................... 2
1 GENERAL INFORMATION ................................................. 2
2 TECHNICAL INFORMATION .............................................. 3
3 SAFETY .............................................................................. 5
4 USE AND OPERATION ....................................................... 5
5 SERVICING ........................................................................ 7
6 FAULT ................................................................................. 9
7 HANDLING AND INSTALLATION...................................... 10
8 ADJUSTMENTS................................................................ 15
9 REPLACING PARTS ......................................................... 16
ANNEXES .........................................................................I
INDEX
Gas tap, greasing, 16
Gas, checking pressure, 8
Gas, connection, 11
General description of appliance, 3
Greasing the gas tap, 16
H
Handling and installation, recommen-
dations for, 10
Handling and lifting, 10
I
Identification of constructor and appli-
ance, 2
Installation and handling, recommenda-
tions for, 10
Installation of appliance, 11
L
Lengthy downtimes of appliance, 7
Lifting and handling, 10
P
Packaging and unpacking, 10
Pilot light injector, replacement, 17
Plate, cleaning, 8
Procedure for requesting service, 3
Purpose of the manual, 2
R
Recommendations for adjust-
ments, 15
Recommendations for cleaning, 7
Recommendations for handling and in-
stallation, 10
Recommendations for replacing parts,
16
Recommendations for servicing, 7
Recommendations for use, 5
Replacement of parts, recommendations
for, 16
Replacement of the burner nozzle, 16
Replacement of the pilot light injector,
- 1 -
17
Replacing the burner air bushing, 17
S
Safety and information signs, 4
Safety and information, signs relating
to, 4
Safety devices, 4
Safety regulations, 5
Safety, devices for, 4
Safety, regulations for, 5
Service, procedure for requesting, 3
Servicing, recommendations for, 7
Switching the burner on and off, 6
T
Technical data, 3
Testing of the appliance, 13
Transport, 10
Troubleshooting, 9
U
Unpacking and packaging, 10
Use, recommendations for, 5
Use, useful advice for, 7
Useful advice for use, 7
page
IT
AUS
DE
FR
ES