Angelo Po 191BR1E Use And Installation Manual page 45

1 - Undo the screws (C) and remove the control
panel (D).
2 - Remove the knob (B).
3 - Undo the screws (A) to remove the lid (E).
4 - Fit the jumper (F) to make the electrical connec-
tion of the terminals (G-H).
5 - Change the connections to the motor terminal
board (L) as shown in the figure.
6 - Fit the lid (E) and secure it with the screw (A).
7 - Replace the control panel (D) and the knob (B)
on completion of the operation.
8 - Remove the test voltage indicator sticker from
the dataplate and apply the new one to identify
the voltage being used
Important
On completion of the operation make sure
that there are no malfunctions.
B
L
L
- 19 -
C
D C
A
H
IDM-39616301500.tif
E
F
IT
G
GB
IDM-39616301700.tif
DE
FR
ES
NL
IDM-39603620000.tif
English