Spare Parts - Weinmann ULM CASE Circulation Description Of The Equipment And Instructions For Use

• Pull Fly pull seal 125 mm, sealing tape Ø 1.8 mm
• Bi-Lok pull seal 215 mm, sealing tape Ø 1.9 mm

8.3 Spare parts

Case handle
Security seal, set of 2*
* Including mounting parts
To replace the following fittings it is necessary to drill out the rivets
securing the parts to be replaced. Then fix the new parts with a
pop riveter.
Case feet, set of 2*
Case hinges, set of 2*
Case fasteners, set of 2*
Case corners, set of 4*
Cover plate*
* Including mounting parts
To replace the following inserts it is necessary to dismantle the
entire shell of the case. For this purpose the rivets of all fittings such
as fasteners, hinges etc. must be drilled out. After positioning the
new inserts, use a pop riveter to attach the fittings again.
Top insert*
Base insert*
Hinged insert*
Ampoule strip
* Including mounting parts
Product and Spare Parts
Article
Article
Article
ULM CASE
Order No.
WM 15145
WM 15147
Order No.
WM 15149
WM 15272
WM 15151
WM 15274
WM 15381
Order No.
WM 15376
WM 15375
WM 15378
WM 5309
EN 11