After Sales Service - Bonnet Neve FLASH User Instructions

comply with the requirements of page 11;
If failure to cool should is not due to any of the above reasons it it persists on even after the above checks, resort
to the nearest after-sales service.
If failure is actually due to malfunctioning, it is absolutely necessary to empty the cabinet and store the foods in
low-temperature coldrooms or freezers that ensure the required preservation temperature.
3) The cabinet is noisy:
• Make sure that screws and bolts are tight;
• Check that the cabinet is perfectly horizontal by the use of a spirit level.
Should the inconvenience persist, contact the nearest after-sales service.
IN CASE OF A GAS LEAK OR FIRE, do not breathe inside the room that houses the cabinet before having aired it
properly. Disconnect the cabinet from the power source by the master switch ahead of the equipment (fig. 18, page
19). DO NOT USE WATER BUT ONLY DRY EXTINGUISHERS TO PUT OUT THE FIRE.
11. AFTER-SALES SERVICE
Should after-sales assistance be needed, we recommend resorting to professionals possessing specific skills, like
those listed on the back of this manual under the official after-sales network section. If spare pars are needed,
request original spares and ensure that only original spares are used on the equipment. Malfunction, however
small, should be reported to the after-sales network as soon as possible. The Company disclaims responsibility for
any jobs performed by personnel lacking authorization or the specific skills required or involving the use of non-
original parts. The information in this documentation is for reference only. This publication may be changed by the
Company at any time, if this is required for technical or marketing reasons. For further details, clients are kindly
requested to resort to the after-sales network.
29