Skyjack SJKB-40-D Operating Manual page 9

Operator's Control Console
6 7 10 12 13 17 18
1
2
3
4
5
Ma40-210
8 9 11 14 16 15
Figure 2-10. Operator's Control Console and Label
1. ENGINE STOP/RUN/START SELECT SWITCH
2. ENGINE CHOKE/GLOW PLUG SWITCH
3. EMERGENCY PUMP ENABLE SWITCH
4. FUEL SELECT TOGGLE SWITCH (Dual Fuel)
5. ENGINE SPEED SELECT TOGGLE SWITCH
6. EMERGENCY STOP BUTTON
7. BOOM UP/DOWN TOGGLE SWITCH
8. RISER UP/DOWN TOGGLE SWITCH
9. JIB UP/DOWN TOGGLE SWITCH
10. TURRET ROTATE TOGGLE SWITCH
11. BOOM EXTEND/RETRACT TOGGLE SWITCH
12. PLATFORM LEVELING TOGGLE SWITCH
13. PLATFORM ROTATE TOGGLE SWITCH
14. BOOM SPEED CONTROL ROTARY SWITCH
15. DRIVE/STEER CONTROLLER
16. HORN PUSH-BUTTON
17. ENGINE WARNING LIGHT
18. TILT SENSOR INDICATOR LIGHT
19. FUNCTION ENABLE LIGHT
OPERATOR'S CONTROL CONSOLE - This metal
control station is located at the front of the platform. It
contains the following controls:
IMPORTANT NOTE
The foot switch MUST be depressed and held to use
any control on the operator's control console. Refer
to Operating Procedures for detailed instructions on
operating these controls.
1. ENGINE STOP/RUN/START SELECT SWITCH - To
start the engine DO NOT depress the foot switch. Turning
the switch to the " " (start) position will engage the
starter, once the engine starts, release the switch and it
will return to the " " (run) position. To stop the engine
turn the switch to the " " (stop) position. The engine
must be running before any functions can be operated.
SECTION 2, Page 6
2. ENGINE CHOKE/GLOW PLUG SWITCH - This
switch when held in the " ð " (right) position, activates
19
the electric choke on gasoline engines or the glow plugs
on the optional diesel engine.
3. EMERGENCY PUMP SELECT TOGGLE SWITCH
- In the event of an emergency, moving this toggle switch
to the" ï " (left) position kills the engine, enables the
12 volt emergency pump and allows all functions to be
operated. To resume normal operation, move the switch
to the right position by closing the switch cover.
4. FUEL SELECT TOGGLE SWITCH (Dual Fuel) - This
switch allows the operator to select the fuel source to be
used.
5. ENGINE SPEED SELECT TOGGLE SWITCH - This
switch allows the operator to select from low or high
engine speed.
6. EMERGENCY STOP BUTTON - This red mushroom-
shaped button is designed to cut power to the platform
controls when struck in the event of an emergency or at
work platform shutdown. To restore power, simply pull
button out.
WARNING
Depressing the Emergency Stop Button instantly
engages parking brakes.
7. BOOM UP/DOWN TOGGLE SWITCH - This switch
controls the up/down movement of the boom section. To
raise the boom section, push and hold this toggle switch
to the " ñ " (up) position. Release switch to stop. To
lower the boom section, push and hold this toggle switch
to the " ò " (down) position. Release switch to stop.
8. RISER UP/DOWN TOGGLE SWITCH - This switch
controls the up/down movement of the riser section. To
raise the riser section, push and hold this toggle switch
to the " ñ " (up) position. Release switch to stop. To
lower the riser section, push and hold this toggle switch
to the " ò " (down) position. Release switch to stop.
9. JIB UP/DOWN TOGGLE SWITCH - This switch
controls the up/down movement of the jib. To move the
jib upward, push and hold this toggle switch to the " ñ "
(up) position. Release switch to stop. To move the jib
downward, push and hold this toggle switch to the " ò "
(down) position. Release switch to stop.
10. TURRET ROTATION TOGGLE SWITCH - This
switch controls clockwise and counterclockwise turret
rotation. To rotate the turret clockwise, push and hold
this toggle switch to the " ï " (left) position. Release
switch to stop. To rotate the turret counterclockwise,
push and hold this toggle switch to the " ð " (right)
position. Release switch to stop.
JUN. 1999
SJKB-40-D, SJKB-40-D/F
TABLE 1-1. SPECIFICATIONS AND FEATURES
Specifications
WEIGHT (4x2) .................................................................................................. 13,700# (6214kg)
WEIGHT (4x4) .................................................................................................. 14,500# (6577kg)
WORK HEIGHT (Nominal) ....................................................................................... 46' (14.02m)
RAISED PLATFORM HEIGHT (Nominal) ................................................................ 40' (12.19m)
STOWED HEIGHT...................................................................................................... 6' 7" (2.0m)
PIVOTAL HEIGHT .................................................................................................... 15' 0" (4.6m)
TAILSWING (At pivotal height) .............................................................................................. Zero
PIVOTAL HEIGHT .................................................................................................... 15' 0" (4.6m)
HORIZONTAL REACH (CL rotation) ........................................................................ 27' 7"(8.4m)
HORIZONTAL REACH (Clear reach) ....................................................................... 24' 8"(7.5m)
STOWED LENGTH ................................................................................................ 18' 3" (5.56m)
PLATFORM CAPACITY (Unrestricted) ................................................................. 500# (227kg)
PLATFORM SIZE .................................................................................. 30" x 66" (.76m x 1.68m)
ELECTRICAL SYSTEM ............................................................................................ 12 Volts DC
GRADABILITY ...................................................................................................................... 30%
TURRET ROTATION .................................................................................................. Continuous
TIRE SIZE ......................................................................................................... 10x16.5 Air Filled
Features
STANDARD EQUIPMENT
4 Foot Hydraulically Controlled Boom Jib
Variable Speed Drive and Function Controls
In-Line Elevating Assembly
Continuous Drive and Steer Directional Sensing
Spring-Applied Hyd-Released Parking Brakes
ANSI and CSA Standards Compliance
Kubota Gas Engine
OPTIONAL EQUIPMENT
Kubota Diesel Engine
Dual Fuel (Gas/Propane)
Operator Horn
All Function Motion Alarm
Travel Alarm
Descent Alarm
Flashing Amber Light
Platform or Chassis Work Lights
Spring-Loaded Half Gate
Spring-Loaded Full Gate
Lifting Lugs
Air or Hydraulic Line to Platform
Cold Weather Start
High Flotation Tires
Foam Filled Tires
Four Wheel Drive
SJKB-40-D, SJKB-40-D/F
DEC. 1999
JUN. 1999 SECTION 1, Page 3