Canon LASER CLASS 730i Service Manual page 131

LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
#4B NCU (NCU settings)
These setting items are for telephone network control functions such as the selection signal
transmission conditions and the detection conditions, for the control signals sent from the
exchange.
#5 TYPE (TYPE setting)
The type setting makes the service data conform to a specific country communications
standards.
#6 SCANNER (SCANNER function setting)
These setting items are for scanned image processing such as edge enhancement and error
diffusion processing.
#7 PRINTER (PRINTER function settings)
These setting items are for basic printer service functions such as the reception picture
reduction conditions. Also there is an item for resetting the printer section without
switching the power off-on.
#8 PDL (PDL settings)
A service menu is offerd for printer function settings and PCL board.
#9 COUNTER (Counter indication)
Use it to check estimates for maintenance/parts replacement.
#10 REPORT (Report output)
Use it to output reports on various service data.
#11 DOWNLOAD (Download)
Do not use.
#12 CLEAR (data initialization mode)
Various data are initialized by selecting one of these setting items. There is
a setting item for checking/inputting the total number of pages printed and total number of
pages scanned by this fax.
#13 ROM (ROM management)
ROM data such as the version number and checksum are displayed.
4-48