Canon LASER CLASS 730i Service Manual page 288

LASER CLASS 730i/720i/710 Chapter 5: Appendix
(12) Connect the 5-pin cable to the connector J3 and J9 of the SCNT board
(13) Attach the cable clip to lower inside the shield case to fix the 5-pin cable.
(14) Inset the spacer in the hole of the SCNT board.
(15) Inset the USB board in the connector J8 of the SCNT board, and fix it with the spacer.
Spacer
Connector J9
Figure 5-92 Preparation for Installation 6
Spacer
Figure 5-93 Preparation for Installation 7
5-80
Connector J3
Cable clip Cable (5-pin)
USB board
manuals4you.com manuals4you.com