Canon LASER CLASS 730i Service Manual page 141

LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
5.5 Explanation of SSSW (Service Soft Switch Settings)
The items registered and set by each of these switches comprise 8-bit switches. The figure
below shows which numbers are assigned to which bits. Each bit has a value of either 0 or 1.
See the chart in the service menu shown in Section 5.4 Service data flowchart to see effective
bits and their default values. The meanings (functions) of the bits are not described in this
manual except the new switches added to this model. See G3 Facsimile SERVICE DATA
HANDBOOK (Rev. 0) (supplied separately) for details of the switches.
Below are examples showing how to read bit switch tables.
Bit Function
0 Service error code
Error dump list
1
2 Receive image transfer
3 Not used
4 Not used
5 Not used
6 Not used
Not used
7
Do not change the settings of switches listed as "Not used".
SW01 0 0
Figure 4-23 Bit Switch Display
Indicates that the
setting is "1".
1
Output
Output
Yes
Figure 4-24 How to Read Bit Switch Tables
0 0 0 0 0 0
Indicates that the
setting is "0".
0
Not Output
Not output
No
4-58
Figures in boldface
are default settings.