Canon LASER CLASS 730i Service Manual page 142

LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
5.6 New SSSWs/Parameters Added to this Model
#1 SSSW
SW01 (service soft switch 01: error management )
Bit Function
0 Service error code
1 Error dump list
2 Enter password at confidential
Rx image data transfer
3 Copy function
4 (New) ##300 series service error code
5 Not used
6 Date & Time setting restriction
7 User setting restriction
[Bit 4]
When "Output" is selected, ##300 series Service error codes are displayed and in reports.
When "Not output" is selected, no Service error codes are displayed.
SW06 (service soft switch 06: scan condition settings)
Bit Function
0 Document feed after DES on
1 Prescan for document scanning
2 Not used
3 (New) Stamp option
4 Document scan width
5 Recording paper output for long
image copy
6 Copy function resolution
7 Superfine mode setting when
AUTO key selected
[Bit 3]
If a stamp unit option is installed, set this switch to 1. If it is set to 1, the Stamp button on
the operational panel and the "STAMP ACTION" menu in Users Data becomes effective.
1
Output
Output
No
No
Output
Setting restricted Setting possible
Setting possible Setting restricted
1
No feed
No prescan
Yes
LETTER
First page
only
Variable
Set
4-59
manuals4you.com manuals4you.com
0
Not output
Not output
Yes
Yes
Not output
0
Feed
Prescan
No
A4
Divided onto
multiple pages
Always fine mode
Not set