Canon LASER CLASS 730i Service Manual page 209

Hide thumbs Also See for LASER CLASS 730i:
Table of Contents

Advertisement

1. INSTALLATION
1.1 Setting up
• Select a site of installation.
• Unpack the fax machine, and check the attachments.
Make sure none is missing and there is no damage.
• Remove the packing material.
Remove all tape and protective material used on the fax machine. Do not forget to remove
the orange protective material used in the reader unit.
• Fit the attachments.
• Make connections.
Connect the telephone line and the handset (option).
Connect the interface cable (LASER CLASS 730i/720i).
• Turn on the power.
Connect the power cord.
• Fit the toner cartridge.
Shake the cartridge, and remove the protective material; then, pull the tab to remove the
seal.
• Set the recording paper.
Put recording paper in the cassette and the multi-purpose tray. When putting paper in the
cassette, be sure to change the paper size to suit the size of the paper. Register the size of the
recording paper by changing PAPER SETTINGS under USER DATA.
• Select the type of telephone line.
To do so, make the following selections: USER DATA>FAX SETTINGS>USER
SETTINGS>TEL LINE SETTINGS>TEL LINE TYPE.
• Register user data for date and time, by selecting USER DATA>TIME SETTINGS>DATE/
TIME SETTINGS; for telephone number, by selecting FAX SETTINGS>USER
SETTINGS>TEL LINE SETTINGS>USER TEL NO.; for fax machine name, USER
DATA>FAX SETTINGS>USER SETTINGS>FAX MACHINE NAME.
1.2 Checking Operation
• Check the level of quality for both reading and printing.
Make a copy, and see that it is free of a fault for both reading and printing.
• Conduct a communications test.
Send and receive a fax by connecting to another fax machine, making sure that the image is
normally sent and the received image is normally printed.
What to do when trouble occurs
Very rarely, during use, the display may go out, all the buttons may stop
working, or some other trouble may occur because of strong electrical noise or
a large amount of static. If such trouble occurs, initialize the RAM (All clear
operation). For how, please refer to Chapter 3, 1.4 All Clear .
LASER CLASS 730i/720i/710 Chapter 5: Appendix
5-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laser class 720iLaser class 710

Table of Contents