Device Groups - ADTRAN SMART/RG SR400ac User Manual

Device Groups

On this page, you can create device groups, assign devices to groups, pause access for devices, delete groups
Note: Before it is possible to assign a device to a group, configuring an access schedule is required first, then configure a device
group, and finally assign the schedule to the group.
Warning: Pausing access for LAN devices not only restricts access to the Internet but LAN access as well. This in turn prevents you
from logging in to the SmartRG gateway to make changes from any LAN clients included in the pause. With this in mind, users are
strongly advised against pausing all LAN devices at the same time. Instead, exclude at least one browser-equipped LAN device from
the Device Group to ensure that a means to modify access schedules, device groups and timeout periods is preserved.
1. In the left menu, click
Note: You cannot delete or rename the unassigned (default) group. You can assign a schedule and pause/restart it.
2. To add a new device group:
a. Click the
Create group
b. In the Name field, enter a descriptive name for the device group.
c. To assign a schedule to the device group, select the schedule in the
Note: If you do not see the schedule that you want, go to the Devices > Access Schedule page and create it. Then,
return to this page and select it.
d. Click Create. The new group appears on the page and a
3. To add a device to a group:
a. Click the
Assign
device to group
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2021
Devices > Device Groups. The following page appears.
button (
button ( ) at the far right , next to the device that you want to add to a device group. The
dialogue appears.
) at the upper right. The Create Group dialog box appears.
Access schedule
Delete group button appears at the top right.
field.
Assign
74