Configuring Log Settings - ADTRAN SMART/RG SR400ac User Manual

As new entries are added to the event log file, the list refreshes to display them.

Configuring Log Settings

On this page, you can enable remote logging.
1. In the left menu, click
2. (Optional) To activate remote logging, click the
3. In the Logging server IP
should be sent. Log messages are sent to this server in addition to the default local destination.
4. In the Log port field, enter or select the port number for the specified logging server. Options are 1 - 9999.
5. In the Log protocol field, select the protocol. Options are TCP and UDP. The default is UDP.
6. Click the Apply button in the
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2021
Admin > Event Log > Log Settings. The following page appears.
slide button
field, enter the IP address (such as 192.168.1.44) of the syslog server to which the log messages
Pending changes... dialog box to save your settings.
next to Enable remote logging. Additional fields appear.
103