Devices; Intellifi Devices - ADTRAN SMART/RG SR400ac User Manual

Devices

In this section, you can configure and manage the devices connected to your gateway. You can group and manage LAN devices as
well as Intellifi mesh network devices.

Intellifi Devices

On this page, you can view the Intellifi mesh devices connected to the network.
Note: To extend the network, you can connect a satellite to a satellite.
1. In the left menu, click
If a LAN device is connected via wireless, the WiFi band appears as the name instead of LAN or WAN. The device colors
identify the device status. The
device identifier legend, showing symbols for HUB, SATELLITE, PLC, and MOCA devices.
There are two views: the simple view (the default) and the detailed view. (The detailed view shows the IP addresses for
each device.) This map refreshes every 10 seconds.
2. To switch between the simple view and the detailed view:
a. Click the Settings
appears.
b. Click the slide button
3. To change the refresh interval:
a. Click the Settings
appears.
b. In the Refresh Interval
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2021
Devices > Intellifi Devices. The following page appears, showing a diagram of the connected devices.
Connection legend at the top right of the page explains the colors. Below that legend is the
button at the top right of the
below Show Detailed View
button at the top right of the
field, select the new interval. Options are 10 seconds to 1 minute. The default is 10
Network Topology section. The Topology Settings diagram box
and then click Save Changes.
Network Topology section. The Topology Settings diagram box
69