Adding Endpoint Device(S) To The 7310-8 Gateway; Verifying Operation - A "Hello World" Example - ADTRAN 7310-8 Getting Started Manual

Lorawan gateway with aws iot core

Hide thumbs Also See for 7310-8:

Table of Contents

4. Your device should shortly switch to use basic station with the previously uploaded certificates.

NOTE: The Server Port Up and Server Port Down options are not used with Basic Station for AWS.

7. Adding Endpoint Device(s) to the 7310-8 Gateway

Refer to the LoRaWAN endpoint device manufacturer's documentation for configuration instructions.

8. Verifying Operation – a "Hello World" Example

Once gateway and device configuration are completed, provisioned OTAA devices can join the AWS IoT network

and start to send messages. Messages from devices are received by AWS IoT Core for LoRaWAN and then

forwarded to the IoT Rules Engine, which in turn facilitates communication between devices. Once a device has

joined the network and can send uplink traffic, you can configure a sample "Hello World" application to test the

ability of the devices to communicate across the network.

8.1 "Hello World" Sample Application Configuration Overview

The sample "Hello World" application described in this section relies on the architecture illustrated in the following

network topology:

Table of Contents