System Level (Parameter); Language; Time Programs - Rotex Controller Series Product Documentation

EbV
5.4.4

SYSTEM level (Parameter)

The parameters in this level refer to the general set values and limiting parameters in the heating system to
be used.
5.4.4.1

LANGUAGE

Factory preset: GERMAN
Setting range: GERMAN, ENGLISH, FRENCH, ITALIAN
Function:
Several languages can be chosen for all the information appearing on the display.
Setting value: D:
GB:
F:
I:
5.4.4.2

Time programs

Factory preset: P1
Setting range: P1, P1-P3
Function:
This parameter determines the enabling of the time programs for the program
selection and for the individual time program programming. When supplied, only one
time program is enabled. The use of only a single switching time program for a wide
range of applications makes it possible to simplify operating.
Setting values: P1:
P1-P3:
Effects: Besides the settings described above, the enabling of programs P1 to P3 enables for
the following settings:
5.4.4.2.1 Operating mode adjustment
The time programs P1, P2 or P3 can be selected in the operating modes automatic
and summer.
5.4.4.2.2 Time programming
When programming, each heating circuit can be assigned one of the three time
programs P1-P3.
5-32
GERMAN
ENGLISH
FRENCH
ITALIAN
Program 1 enabled,
Programs 2 and 3 = disabled
All three programs enabled
Product documentation THETA NORM/UNIT