Rotex Controller Series Product Documentation page 26

EbV
Control during the
holiday mode
Setting
Earlier termination
Factory setting
Setting range
Display
5.1.2.5.2 Absent Mode (Short-term Program)
ABSENT TIL
01. 1 0
20 .10
Application
Setting
Earlier termination
Factory setting
5-6
If outdoor temperatures are below the frost limit (see menu "System-
parameter - Parameter 5 = plant frost protection"), the heating circuits
without wall modules
are controlled according to a reduced specified room temperature of 3 °C.
with wall modules
are controlled according to their individual frost protection limit of the heating circuit
(see menu "Unmixed- or mixed circuit -Parameter 8 = Room frost protection limit") of
10 °C.
see 5.1.2.5 key "Operating mode" (basic display)
An active holiday mode can be terminated after an early return. Simply press the
"operating mode" ¢ key and turn the rotary pushbutton to adjust to automatic mode.
Current date
Current date ... Current date + 250 days
An active holiday program appears on the basic display with the indication of the
return date.
The operating mode ABSENT causes the heating operation to be switched off
temporarily with frost protection. During the absence, all heating circuits are
controlled according to the set reduced room temperature. After the set time period,
the heating circuits automatically switch back to the operating mode which was active
before the absence. Short-term programs such as PARTY or HOLIDAY are skipped.
Short absence during the heating season
see 5.1.2.5 key "Operating mode" (basic display)
An active absence mode can be terminated after an early return. Simply press the
"operating mode" ¢ key and turn the rotary pushbutton to adjust to automatic mode.
P1 after activation
Product documentation THETA NORM/UNIT