Connecting Cable - Hamamatsu Photonics C11440-36U Instruction Manual

C11440-36U Instruction Manual Ver.1.1

7. CONNECTING CABLE

7-1 CONNECTING CABLE
① AC adapter
This is the cord to supply a power supply. Use the accessory AC adapter.
② USB 3.0 MicroB interface cable (Option)
This is the cable to connect the camera and the computer.
12
① AC adapter
② USB 3.0 MicroB interface cable
Computer
Figure 7-1 Connecting cable
•
Connect the cable to the connector of the computer corresponding to USB 3.0.
•
When the USB 3.0 cable is connected, the application software must be closed
and the camera must be turned off.
•
Hamamatsu recommends A12046-03 optional USB 3.0 MicroB interface cable
for this camera. The camera complies with EMC direction with using A12046-03
USB 3.0 MicroB interface cable. Be careful that the camera with other interface
cable may not fulfill the EMC directive requirements.
Camera （Rear）
USB 3.0 interface board