Installation - Hamamatsu Photonics C11440-36U Instruction Manual

3. INSTALLATION

Avoid using or storing this camera in the following places
Where the ambient temperature for using this system might fall below 0 °C or rise
•
above +40 °C
Where the ambient temperature for storing this system might fall below -10 °C or
•
rise above +50 °C
Where the temperature varies extremely
•
In direct sunlight or near a heater
•
Where the humidity is 30 % or less or 80 % or more or where there is dripping water
•
Where the dew condensation might generate
•
Close to a strong source of magnetism or radio waves
•
Where there is vibration
•
Where it might come into contact with corrosive gases (such as chlorine or fluorine)
•
Where there is a lot of dust
•
Do not allow the ventilation ports to become blocked
•
Do not allow the ventilation ports to become blocked
To prevent overheating in the camera's interior, do not wrap the unit in
cloth or other material, or in any way allow the power supply unit's
ventilation ports to become blocked.
If the camera is being operated in an enclosed environment, ensure
clearance of at least 10 cm from both the intake and exhaust vents when
setting up the camera.
C11440-36U Instruction Manual Ver.1.1
5