1-7-2. Replacing the Protection Glass and Glass Cushion
Parts to be prepared in addition to the protection glass:
. Glass cushion, 1 piece : 3-776-618-xx
Removal
1. Push the release knob in the direction of the arrow
to release the lock and remove the VF tube by rotating
it in the direction of the arrow .
2. Remove the viewfi nder main unit and then remove the
LCD module.
(Perform steps 1 to 12 of "1-7-1. Replacing the LCD
module.")
3. Peel off the protection glass from glass cushion to
remove it.
4. Peel off the glass cushion from the front chassis and
wipe the attaching surface with alcohol.
HDVF-C30WR
Fig. 2
Red marks
Release knob
Protection glass
Glass cushion
VF tube
Fig. 1
Front chassis
Attaching
surface
1-11 (E)