3-4-5 To Eject Discs With
the Unit Powered Off
When the power is not supplied, it may not
be possible to eject discs by pressing the
EJECT button. In these situations, you can
use the following as an emergency
procedure to eject a disc manually.
Power the unit off.
Turn the cover of the manual eject
mechanism on the front panel
counterclockwise, as shown in the
Be careful not to turn the cover more
Check the position of the screw, then
using a Phillips screwdriver, turn the
screw counterclockwise until the disc
After ejecting the disc, it is not
necessary to return the screw to its
original position. The next time the
unit is powered on, normal operation
Replace the cover.
3-4-6 Media Protection
This unit is equipped with a media
The media protection function means that
when a disc is loaded in the unit, if you
press the 1 (power) button on the rear
panel, turning it off, or disconnect the
power cord to shut off the AC supply, the
unit switches automatically to standby-off
mode, and prevent a disc error.
3-4 Handling Discs