Sony HDVF-C30WR Maintenance Manual page 20

3. Remove the six screws and remove the bayonet ring
(TUBE), elbow sub panel and elbow sub sheet from
the VF tube.
4. Remove the two screws and remove the ground plate
(B-M) and mirror assembly from the VF tube.
n
Be extremely careful not to give any scar or stain on
the mirror surface during the removal and installation
procedures.
1-14 (E)
Tapping screws
M2 x 5
Bayonet ring
(TUBE)
Elbow sub panel
Elbow sub sheet
VF tube
Mirror surface
VF tube
Tapping screws
M2 x 5
Tapping screws
M2 x 5
Ground
plate (B-M)
Mirror
assembly
HDVF-C30WR