Rewriting The Pld Internal Data - Sony HDVF-C30WR Maintenance Manual

1-11. Rewriting the PLD Internal Data

This unit uses the PLD (Programmable Logic Device) that conforms to the e-Production (EPR) system
when rewriting the internal data.
If the PLD needs to be upgraded, contact your Sony Sales Offi ce/Service Center.
n
As the PLD cannot be replaced, replace the entire PR-312 board or PR-103 board when the PLD is defec-
tive.
e-Production system has the advantages as shown below.
. To rewrite the PLD internal data:
1. The standard fi xture cable can be used.
2. The standard software (PLD Download Tool) can be used.
. The PLD internal data is controlled in the Sony Database Server under the name Project fi le
(E_xxx_xxx_xx_xx).
. The printed circuit board is equipped with the standard connector (EPR connector) to write the PLD
internal data. The indication "EPR" is shown on the printed circuit board.
Corresponding PLD
PLD EPR connector
(Ref No./board name)
IC500/PR-312 CN500/PR-312
IC11/VPR-103 CN3/VPR-103
Equipment required
. PLD download tool (Sony part number : J-7120-140-A)
. PC
PC having parallel port
PC in which the PLD Download Tool software is already installed.
Regarding the applicable OS and the operating environment, refer to "Download Tool Operating In-
struction for Device Programming."
. Camera
A camera that can be connected to HDVF-C30WR.
. Connecting cable (Sony part number : 1-827-086-23)
1-18 (E)
EPR type Project fi le No.
EPR2 E_000_004_40_xx
EPR E_000_004_41_xx
HDVF-C30WR