FLIR FlashSight User Manual page 5

FlashSight™ User's Guide
CAUTION
Operating FlashSight outside of its specified operating temperature range or voltage
range can cause permanent damage and will void the warranty.
CAUTION
When not in use, replace the lens cap over the objective lens. When the lens cap is
not in place, avoid pointing the sight directly at extremely high-intensity radiation
sources, such as the sun, lasers, arc welders, etc. This warning applies whether or
not the system is powered.
CAUTION
Only clean the lens in the manner prescribed in the Appendix of this document.
CAUTION
If you have questions that are not covered in this manual, or need service, contact
Customer Support at (805) 964-9797 for additional information prior to returning your
FlashSight.
Copyright © 2006, FLIR Systems, Inc. 431-0002-09-10 Version 100 2