Flashsight User Controls; On/Off Button - FLIR FlashSight User Manual

FlashSight™ User's Guide
4

FlashSight User Controls

Figure 8 shows the location of all user controls on the FlashSight. Detailed
descriptions for using these controls are described herein.
Lens Cap
On/Off

4.1 On/Off Button

The "on/off" button is located on the left-side of the FlashSight assembly. To
turn the system on, simply press the button, then release. To prevent
inadvertent turn-off, the button must be held for 2 seconds to power down
FlashSight. The button delay is to prevent inadvertent system turn-off.
Copyright © 2006, FLIR Systems, Inc. 431-0002-09-10 Version 100
Lens Focus
(b) Left side
Figure 8: FlashSight User Controls
(a) Top
Eyepiece focus
Image
Capture
Menu Control
Shutter Control
(c) Right side
7