FLIR FlashSight User Manual page 4

FlashSight™ User's Guide
Cautions and Warnings
CAUTION
The FlashSight battery case will accommodate any standard 1.5V AA batteries.
Care must be taken to align battery contacts in the direction depicted on the battery
case. Replace all 4 batteries as a set. Do not mix new with used and do not mix
battery types (e.g., alkaline and lithium). Do not install batteries directly into the
battery compartment without the battery case.
CAUTION
Observe battery manufacturer's guidelines for safe handling and proper disposal of
batteries.
CAUTION
FlashSight operates over a wide operating temperature range (-40
all AA batteries are specified over this same temperature span. Check the
manufacturer's specifications of your selected battery to verify the valid temperature
range. For cold temperature operation, lithium cells are recommended
NOTE
It is recommended to remove batteries prior to long-term storage of FlashSight,
particularly if stored at elevated temperature.
CAUTION
It is not possible to charge batteries while they are installed in FlashSight. If using
rechargeable batteries, remove them from the battery compartment before charging
in the manner specified by the battery manufacturer.
CAUTION
Do not disassemble the FlashSight enclosure. Disassembly can cause permanent
damage and will void the warranty.
† Energizer®-brand L91 lithium AA cells are capable of operating over the full temperature range of ThermoSight.
Copyright © 2006, FLIR Systems, Inc. 431-0002-09-10 Version 100
o o
C to +55 C). Not
†
.
1