Hp X4000 Technical Characteristics - HP x4000 Getting Started Manual

Troubleshooting

HP x4000 Technical Characteristics

HP x4000 Technical Characteristics

NOTE Operating temperature and humidity ranges may vary depending on the
mass storage devices installed. High humidity levels can cause improper
operation of disk drives. Low humidity ranges can aggravate static
electricity problems and cause excessive wear of the disk surface.
When you turn off your workstation with the power button on the front
panel, the power consumption falls below 10W, but is not zero. To reach
zero power consumption when the computer is off, either unplug the
workstation from the power outlet or use a power strip with a switch.
Table 2-2 x4000 Technical Characteristics
Weight
Dimensions
Footprint
Power Supply
Input voltage
Input frequency
Typical input power
Max avg input power
Maximum output power
Storage Humidity
Operating Humidity
Storage Temperature
Operating Temperature
Altitude
42
This manual downloaded from http://www.manualowl.com
Minimum configuration: 40.20 lb. (18.24 kg)
Maximum configuration: 45.40 lb. (20.60 kg)
Width: 8.22 in. (20.90 cm)
Height: 19.02 in. (48.30 cm)
Depth: 18.62 in. (47.3cm)
153.06 in. (988.57 cm)
90 - 250 VAC
50/60 Hz
365 W
500 W
465 W
90% (relative, non-condensing)
15 to 80% (relative, non-condensing)
-40o C (-40o F) to 70o C (158o F)
5o C (41o F) to 35o C (95o F)
Operating: 0 to 10,000 ft. (3100 m)
Non-operating: 0 to 15,000 ft. (4500 m)
Chapter 2