HP x4000 Getting Started Manual page 34

Troubleshooting
Solving Hardware Problems
Clearing the Administrator Password
To clear the Administrator password:
34
This manual downloaded from http://www.manualowl.com
1. Turn off the workstation and remove the cover. For instructions on
how to remove the workstation's cover, see the HP x4000 Technical
Reference on the Web at: http://www.hp.com/go/workstationsupport
2. Set switch 1 on the system board switch block to
3. Replace the workstation cover.
4. Turn on the workstation and press
summary page.
5. When a message appears indicating that the passwords have been
cleared, turn off the workstation and remove the cover.
6. Set switch 1 on the system board block back to
7. Replace the workstation cover.
8. If you want to set new passwords, follow the instructions given in
"Setting Passwords" on page 23.
.
ON
when prompted to see the
ESC
.
OFF
Chapter 2