Workstation Specifications; Physical Characteristics And Technical Specifications - HP Z1 Maintenance And Service Manual

Workstation specifications

Physical characteristics and technical specifications

Weight
Dimensions
Processor technology
Power supply
Memory technology
8 Chapter 1 Hardware overview
HP Z1 Workstation
With stand
Without stand
Stand only
Upright, including stand
Upright, excluding stand
Intel® Series C206 chipset with:
Support for the Intel® Xeon® Processor E3 Family or 2nd generation Intel® Core™
●
processors up to 95W
Integrated 2-channel memory controller
●
Microarchitecture improvements
●
Integrated graphics (some models)
●
Advanced Vector Extensions (AVX) to increase floating point performance
●
Intel DMI2 interface connecting the processor to the I/O controller
●
400W, 90% efficient, 80 PLUS Gold, compatible with ENERGY STAR® requirements
●
Supports European Union ERP Lot 6 tier2 power limit of less than 0.5W in off mode
●
Dual in-line memory modules (DIMMs) based on DDR3 1600MHz technology
●
Supports error checking and correcting (ECC) and non-ECC DIMMs
●
Two direct-attach memory channels enable low-latency access and fast data transfer
●
for improved performance
Up to 32 GB system memory (8 GB DIMMs)
●
1600 MHz 2, 4, 8 GB ECC unbuffered DIMM
●
1600 MHz 2 GB non ECC unbuffered DIMM
●
NOTE: The processor controls the speed of the memory. If the processor only supports
1333 MHz memory, then memory will run at 1333 MHz regardless of the speed
capability of the DIMMs.
21.3 kg (47.0 lbs)
15.4 kg (34.0 lbs)
5.9 kg (13.0 lbs)
Height: 58.42 cm (23.0 in)
Width: 66.04 cm (26.0 in)
Depth: 41.91 cm (16.5 in)
Height: 45.72 cm (18.0 in)
Width: 66.04 cm (26.0 in)
Depth: 8.13 cm (3.2 in)