Connect The Audio Accessories; Connect To A Network (Lan) - HP x4000 Getting Started Manual

Connect the Audio Accessories

Connect the microphone and headphones (or amplified speakers) to the
HP Multimedia keyboard as shown in Figure 1-2.
WARNING Listening to loud sounds for prolonged periods of time may
permanently damage your hearing.
NOTE The internal speaker is deactivated when you use the output line jack on
the rear of the workstation. If you have connected the keyboard
headphones connector to this jack, you must connect speakers or
headphones to the keyboard for audio output.
Figure 1-2 Connecting Audio Accessories

Connect to a Network (LAN)

Your workstation's 10BT/100TX LAN auto-sensing interface adapter
supports both 10Mbit/s and 100 Mbit/s operation.
Connect the network cable to the LAN connector shown in Figure 1-1 on
page 12.
Chapter 1
This manual downloaded from http://www.manualowl.com
Setting Up And Using Your Workstation
Setting Up Your Workstation
Keyboard microphone
socket
Keyboard headphones/
speaker socket
13