Kernau KFC 6008 GE X Operation Manual page 72

Replacing the oven light bulb
To avoid the possibility of an electric shock, the appliance must be turned off.
1. Rotate all knobs into 0 positions to turn the oven off.
2. Unscrew and clean the lamp cover – wipe it clean before replacing it.
3. Unscrew the light bulb. If necessary, replace it with proper light bulb, with parameters
as below:
- voltage 230 V
- power 25 W
- E14 head
- temperature resistance 300ºC
4. Screw the new light bulb into
place.
5. Screw the cover into place.
Removing the door
To make cleaning easier, you can remove the door. To do this, please open oven door, lift security tabs
in both hinges (Pic. A). Then, close the door a bit, lift them and remove from the frame. To mount the
door, follow the instructions in reverse order. When placing oven door back, make sure that cuts on the
hinge match to the socket. Afterwards, lock the security tabs in both hinges and push them into place.
Inappropriate mounting of the door may break them when closing
A
Lifting the hinge security tags
EN 72