Kernau KFC 6008 GE X Operation Manual page 61

Semi-automatic operation
• If you would like your oven to shut down after certain time:
• Set the timer and thermostat to the desired positions.
• Press MENU sensor until the timer will blink.
• Set the desired time with </> sensors. Time range is from 1 minute to 10 hours.
Set time will be accepted after 7 seconds. The timer will display current time again and the active
function AUTO. After set time expires, sound signal will be heard and the oven will shut down
automatically, AUTO function will blink.
To finish the operation:
• Turn the thermostat and function knobs to OFF position.
• Press any sensor to turn the alarm off. AUTO indicator will turn off and the timer will display
current time.
Automatic operation
If you wish your oven to work for a certain period and shut down at set time, you need to:
• press OK sensor until display will flash
• set desired operation time with </>sensors as in semi-auto operation
• press the OK sensor until display will flash
• set shut down time with </>sensors. You can set any time you would like, if it is less than
23 hours and 59 minutes from current time
• set thermostat and function selection knobs at desired positions. When AUTO function
is active, the oven will not start operation until it is supposed to. On time will be calculated
by deducing operation time from finish time (for example – operation time set for 1 hour and
end time is 14:00 – the oven will start at 13:00).
After reaching the set time, the oven will shut down and alarm will sound. Set the knobs to off position.
• Press any sensor to turn off audible alarm. The timer will show current time.
Erasing the settings
You can erase timer and automatic opertaion settings at any time.
Deleting automatic settings
• Press </> sensors simultaneously.
Deleting timer setting
• Press OK sensor to select timer function.
• Press </> sensors again.
EN 61