Changing tone
To select signal type you should:
•
Press </> sensors simultaneously.
•
Press MENU sensor to select „ton" setting, display will flash.
•
By touching the sensor, select one of the tones, from 1 to 3.
Fan assisted oven:
The oven is equipped with the ring, upper and lower heating elements. Oven is controlled with
thermostat and function selection knobs.
Function is set by turning the knobs to
the desired position:
- select desired temperature,
- select desired function.
Oven can be turned off by rotating the
knobs to 0 position.
ATTENTION:
Heating will be starated only after
thermostat will be set too.
EN
62
0