Kernau KFC 6008 GE X Operation Manual page 53

• The gas cooker can be bulit in furniture string only to the height of the worktop (850mm
from the floor). Building in above this level is not recommended.
• The burners plate extends above the furniture string (Pic. B).
NIEPRAWIDŁOWO
INCORECT
• The furnitures in the string have to have lining and the glue resistant to heat 100ºC. Failure
to copmly this condition may affects as deforming and unstick the lining. If not sure about
the heat resistance of furnitures, the cooker should be built-in with furniture keeping the
distance 20mm.
• The wall or furnitures located next to the cooker, which are above of burners plate, should be
installed in distance 110mm from the edge of burners plate.
• The wall located behind of the gas cooker should be covered with the heat resistant. During
using the cooker, the rear wall may heat up to 50oC.
• The gas cooker should be mounted on hard, level floor (do not place on base).
• Before start the usage, the cooker should be leveled, which have particular impact on even
spreading out the oils on pan. Adjusting feet are available for this purpose, accessible after
removing the drawer. Adjustment range +/- 5mm.
ATTENTION:
To avoid the appliance from tipping over, install a stabilizing lock.
m in .
1 1 0 m m
Pic. A
m in .
2 0 m m
PRAWIDŁOWO
CORRECT
EN 53
Pic. B