Sony BCU-100 Maintenance Manual page 52

Error code Error summary
0x0c090006 MEM-122/MEM-126 board
memory program error
0x0c090007 Cannot obtain memory size error
0x0c090008 Memory size error
0x0c09000a Temperature sensing error of FPGA
on the MEM-122/MEM-126 board
0x0c09000b Temperature sensing error on the
MEM-122/MEM-126 board
0x0c09000d Device file error
0x0d120001 EDID read error
Error when the EDID data is
unable to read.
0x0d120002 Hot Plug error
Error when the Hot Plug Detect
signal cannot be sent via transmission.
0x0d120003 EDID Structure version error
Error when the EDID Structure
version is "0".
0x0d120004 Unknown error of the VIF-40 board
check
Error if version is null when reading
the EDID Structure version.
0x0d120005 EDID checksum error
0xE0xxxxxx Peripherals of main devices error
0xE1xxxxxx BE error
0xE2xxxxxx XDR memory test error using
PPU/SPU
0xE3xxxxxx RSX error
0xE4xxxxxx SB error
1-44 (E)
Possible cause and remedy
The MEM-122/MEM-126 board may be defective or have connection failure.
The error check program (xram uty) did not operate correctly.
Or the MEM-122/MEM-126 board may be defective.
The MEM-122/MEM-126 board may be defective or have connection failure.
The heat sink on the MEM-122/MEM-126 board may not be installed correctly.
Or it may be used in the circumstance where the exhaust or intake surface is
covered.
The heat sink on the MEM-122/MEM-126 board may not be installed correctly.
Or it may be used in the circumstance where the exhaust or intake surface is
covered.
The MEM-122/MEM-126 board may not be connected correctly.
Or the MEM-122/MEM-126 board may be defective.
Monitor is not connected to the DVI connector. Alternately, an error in between
I2C0 and DDC of the VIF-40 board is probable.
Monitor is not connected to the DVI connector. Alternately, an error in between
I2C1, FPGA and SII1178 of the VIF-40 board is probable.
Monitor supporting DDC is not connected. Alternately, the defective VIF-40
board is probable.
Monitor supporting DDC is not connected. Alternately, the defective VIF-40
board is probable.
Defective VIF-40 board is probable.
Defect of Cell/B.E., RSX, SCC, or peripherals, or defect of supply power or
clock system.
Operation defect of Cell/B.E., memory (XDR), or SPU, or defect of supply
power or clock system.
Defect of the memory (XDR) or Cell/B.E., or defect of the power supply or
clock system.
Defect of RSX, such as internal logic defect, GDDR3 defect, or RRAC defect,
defect of supply power or clock system.
Error such as the power supply system for the SB is defective, an error in
between GBE and PHY, inappropriate USB (HS) device is inserted in the port.
BCU-100 MM