Replacing The Hdd - Sony BCU-100 Maintenance Manual

Installation/Removal
n
When replacing the battery, do not touch the battery
directly as this may corrode electrode.
1. Remove the top panel. (Refer to Section 1-2.)
2. Remove the lithium battery from the BE-28 board.
Pull up the battery while pressing it.
3. Install a new lithium battery.
4. Install the top panel.
5. After replacing the battery, set the date and time. (For
details, refer to "Battery Replacement" in "1-9-4. Diag
Mode (Offline Defect Diagnosis Function)".)
1-6 (E)

1-3-5. Replacing the HDD

Replacing part: HDD ASSY
Part number:
w
Be sure to unplug the power supply cord from the outlet
before starting the replacement work.
Removal
1. Remove the front panel. (Refer to Section 1-2.)
2. While pressing the lock lever of the HDD case assem-
BE-28 board
3. Remove the four screws (B6-32 UNC), and remove
A-1544-877-A
bly in the direction of arrow 1, pull out the HDD by
the handle in the direction of arrow 2.
Handle
2
1
Lock lever
the HDD from the HDD case assembly.
HDD
B6-32 UNC
B6-32 UNC
HDD case assembly
HDD case assembly
B6-32 UNC
B6-32 UNC
BCU-100 MM