Sony BCU-100 Maintenance Manual page 43

2) HDD Replacement
This is an item to be used when replacing the HDD.
When the submenu item "2. HDD Replacement" is selected, the following submenu opens.
This is an item to check "Write/Read/Verify" for the HDD. When this item is executed, the data in
the HDD will be erased.
The following dialog appears when before executing this item. Click "Yes" to start execution.
Execution does not start when you click "No".
3) Battery Replacement
This is an item to be used when replacing the battery.
When the submenu item "3. Battery Replacement" is selected, the following submenu opens. Config-
ure the RTC setting.
BCU-100 MM
1-35 (E)