5500 Series Power Operator - PULL SIDE Installation
PULL Template
Right hand door opening to 120° shown.
1-1/4
(32)
7-5/16
(186)
•
Do not scale drawing.
•
Right hand door shown.
•
All dimensions given in inches (mm).
•
Maximum frame reveal is 1/8" (3mm) for this application.
Notes:
1.
Thickness recommended for reinforcements in hollow metal
doors and frames is charted on page 4.
2.
This template information based upon use of 5" (127mm)
maximum width butt hinges or 3/4" (19mm) offset pivots. A
separate template is required for other conditions.
3.
Conduit hole nearest hinge is suggested for 120 VAC power input.
4.
Door must be visible by person operating activation switch(es).
Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9355-0001-020 Rev 1 08/20
15-1/2
(394)
13-3/4
(349)
11-5/8
(295)
7/8
Ø (2x)
(23)
9/16
(14)
13-1/16
(332)
7-5/8
(194)
1-1/2
(38)
1/4-20 Machine Screw or
No 14 Wood Screw (4x)
19-1/8
(486)
#12 (2x) In Door
Right Hand
PULL
1-1/4
(32)
Push Side
Pull Side
Left Hand
PULL
15