ASSA ABLOY
2
6
7
8
Tools required:
• 1/8" allen wrench (included)
• Flat blade screwdriver (potentiometer & terminal size)
• Screwdriver (Phillips size 2)
• Tape ruler
•
Always disconnect the main power to the operator prior to
servicing or cleaning.
•
To reduce the risk of injury or person, use the operator only with
Pedestrian Swing doors.
•
This operator is for indoor use only.
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2015 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
3
1
10
12
9
Item No. Description
1
Back plate
2
Door Closer (1601LAP or 1601BFLAP)
3
Motor Assembly (5700M)
4
Inverter (5700IN)
5
Cover (5700CVR)
6
On/Off switch
7
Circuit Breaker
8
120VAC Electrical Connections
9
Activation Inputs
10
Door Open/Closed Position Magnets
11
Optional RF Receiver
12
Power Supply - 1.1A 24V
!
Installation and Instruction Manual
4
11
• Power drill and set of drill bits
• Center punch
• Wire stripper
• #7 drill 1/4-20 tap (metal frame install)
WARNINGS
•
120VAC power supplied to the operator must be a dedicated
circuit from the main circuit breaker panel and must NOT be
connected into any building lighting system that operates
flourescent lights.
•
Maximum door size: 48 in (1219mm) wide x 250 lb (113.4kg).
5700
Series
LEO
Power Operator
80-9357-0008-020 (Rev 3)
5
80-9357-0008-020 (Rev 3)
®