Heartbeat (Periodic Alive Notification) [enabled/disabled]: incorporates a
one-bit object to the project ("[Heartbeat] Object to Send '1'") that will be
sent periodically with a value of "1" to notify that the device is still working (still
alive).
Note: the first sending after download or bus failure takes place with a delay
of up to 255 seconds, to prevent bus overload. The following sendings
match the period set.
Ambient Luminosity Sensor [enabled/disabled]: enables or disables the
ambient luminosity sensor. When enabled, a new tab is added in the tree on
the left. For more information, see section 2.1.1.1.
2.1.1.1 AMBIENT LUMINOSITY SENSOR
Presentia W0 incorporates a luminosity sensor to receive and monitor ambient
luminosity measurement.
Please refer to the specific manual "Luminosity and Proximity Sensor" (available in
the Flat Display product section at the Zennio homepage, www.zennio.com) for
detailed information about the functionality and the configuration of the related
parameters.
Note: Proximity functionality, described in the "Luminosity and Proximity Sensor"
manual, is not included in Presentia W0.
http://www.zennio.com
Figure 3. Heartbeat
Technical Support:
Presentia W0
http://support.zennio.com
8