Table of Contents
Advertisement
3-4. FILTERING OF SHORTENING
(Optional Feature)
(Continued)
3-5. FILTER PUMP PROBLEM
PREVENTION (Optional Feature)
5.
6.
7.
1.
2.
Figure 3-2
IF THERE ARE AIR BUBBLES COMING UP
IN THE SHORTENING BEFORE ALL
SHORTENING IS PUMPED UP, IT'S POSSIBLE
THAT THE FILTER CONNECTION AT THE
UNION ON THE FILTER TUBE IS NOT
TIGHTENED PROPERLY. IF SO, TURN
OFF THE PUMP AND WEAR PROTECTIVE
GLOVES OR CLOTH WHEN TIGHTENING
THE UNION. THIS UNION WILL BE HOT.
SEVERE BURNS COULD RESULT.
Pull out the pump handle, pump all of the shortening out of
the filter drain pan and back into the frypot. When the pump
is pumping air only, move the pump switch from PUMP to
OFF.
Check the level of the shortening in the frypot. Add fresh
shortening if necessary, until it reaches the bottom level
indicator line on the right wall of the frypot.
About 10 to 12 filterings can be made with one filter
paper envelope, depending on:
the quantity and type of product fried and filtered
he type of breading used
the amount of crumbs left inside the filter drain
pan. When the filter screen assembly and filter
paper become clogged, and the pumping flow
slows. Clean the filter screen assembly and
change the filter envelope.
To continue cooking, move the main POWER switch to
the ON position, and shortening reheats.
To help prevent filter pump problems:
Properly install paper envelope over the filter screens.
Fold the open end of the envelope, and clamp with retaining
clips so that crumbs cannot enter. Figure 3-2.
Pump shortening, until you see bubbles in the fry pot.
OFE14X
13
Advertisement
Table of Contents
