Henny Penny OFE-141 Manual page 11

Open fryer
Table of Contents

Advertisement

C1500 OPERATIONS
electronic controls
AND PROCEDURES
C1500 OPERATIONS
AND PROCEDURES
(Continued)
The Computron 1500 controls are available on both split
frypot and full frypot fryers. The following is a brief description
of the operating procedures for fryers with these controls.
1.
Be sure the drain valve is in the closed position.
2.
Place basket support inside of frypot.
3.
Make sure frypot is filled with shortening to the proper
level.
4.
Display shows "OFF" until power switch is turned to the
ON position. Display shows the selected product as
"P-1", "P-2", "P-3", etc, and the unit automatically starts
the Melt Cycle until the shortening temperature reaches
250
F (121
C). The control automatically exits the Melt
Cycle.
To assign a product to a timer button, press product button and
then the desired timer button. "XXXX" is displayed if the product
doesn't match the current set-point. To change to a new product
(and set-point) press and hold the timer to choose the new set-
point. Once the new set-point is chosen, press the timer button to
start the cook cycle.
Full vat operation: Only products with the same set-point and
LED's on, can be selected for cooking .
Split vat operation: Products with two different set-points and
LED's on, can be chosen.
The OFE884 series open fryer has several safety devices
which shuts-down the electricity supply when they are
activated. The above procedures should be followed to
restart the open fryer and if the shut down is repeated, a
qualified technician should be notified.
The Melt Cycle may be bypassed, if desired, by pressing
and holding
Do not bypass the Melt Cycle unless enough shortening
on gas fryers and elements on electric fryers. If Melt
Cycle is bypassed before all burner tubes or elements
are covered, excessive smoking of the shortening, or a
fire will result.
5.
Once out of the Melt Cycle, the shortening is heated
until
lights and the selected product is displayed.
Thoroughly stir shortening to stabilize the temperature
throughout the frypots.
for 3 seconds.
OFE14X
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ofe-142

Table of Contents