Table 10: FEC16 technical specifications
Compliance
The performance specifications are nominal and conform to
acceptable industry standard. For application at conditions
beyond these specifications, consult the local Johnson
Controls
office. Johnson Controls shall not be liable for
®
damages resulting from misapplication or misuse of its
products.
Product warranty
This product is covered by a limited warranty, details
of which can be found at
buildingswarranty.
Single point of contact
APAC
JOHNSON CONTROLS
C/O CONTROLS PRODUCT
MANAGEMENT
NO. 32 CHANGJIJANG RD NEW
DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA
For more contact information, refer to
www.johnsoncontrols.com/locations.
United States: UL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Canada: UL Listed, File E107041, CCN PAZX7 CAN/CSA C22.2 No.205, Signal Equipment
Industry Canada Compliant, ICES-003
Europe: Johnson Controls declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive.
Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant
BACnet International: BACnet Testing Laboratories (BTL) Protocol Revision 4 Listed BACnet
Application Specific Controller (B-ASC)
www.johnsoncontrols.com/
Europe
NA/SA
JOHNSON CONTROLS
JOHNSON CONTROLS
WESTENDHOF 3
507 E MICHIGAN ST
45143 ESSEN
MILWAUKEE WI 53202
GERMANY
USA
Metasys System FEC1611 and FEC1621 Field Equipment Controller Installation Guide
21
Need help?
Do you have a question about the Metasys FEC Series and is the answer not in the manual?