Time And Date Settings - D-Link NUCLIAS CONNECT DAP-2680 User Manual

Web User Interface
Enter the NTP server IP, choose the time zone, and enable or disable daylight saving time.
Current Time Displays the current time and date.
Enable NTP
Check the box to enable the AP to get system
time from an NTP server from the Internet.
NTP Server Enter the NTP server IP address.
Time Zone
Click the drop-down menu to select your
correct Time Zone.
Date And Time Set the time for the AP or click Copy Your
Computer's Time Settings to copy the time
from the computer in use (Make sure that the
computer's time is set correctly).
Enable Daylight Saving Check the box to enable the daylight saving
time settings.
Daylight Saving Offset Click the drop-down menu to select the
offsetting variable in minutes to adjust for
daylight saving time.
Daylight Saving Dates Click the drop-down menu to designate the
start/end date and time for daylight saving time.
Save Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2680 User Manual

Time and Date Settings

85