Limit Administrator; System Name Settings - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Check one or more of the eight main categories to display the various hidden administrator parameters and settings displayed on the next five
pages. Each of the eight main categories display various hidden administrator parameters and settings.

Limit Administrator

Check the box and the enter the specific VLAN
VLAN ID
ID that the administrator will be allowed to log
in from.
Limit Administrator IP
Check the box to enable the limit administrator
IP address.
IP Range Enter the IP address range that the
administrator will be allowed to log in from and
then click Add.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
System Name
Enter the name of the device. The default name
is D-Link DAP-3666.
Location Enter the physical location of the device, e.g.
72nd Floor, D-Link HQ.
MDNS Name Enter the name of the multicast DNS. The
default name is dap3666.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
D-Link DAP-3666 User Manual
Limit Administrator

System Name Settings

87