Table of Contents
Advertisement
SLA-4 SPECIFICATIONS
Dimensions
Weight
Input Connections
Output Connections
Input Impedance
Input Sensitivity
Output Power, 8 ohms
Output Power, 4 ohms
Bridged Output Power, 16 ohms
Bridged Output Power, 8 ohms
Stable into
CMRR
Frequency Response
Hum and Noise
Total Harmonic Distortion (THD)
Slew Rate
Damping Factor
Transformer Type
Power Requirements
ART maintains a policy of constant product improvement. ART reserves the
right to make changes in design or make additions to or improvements upon
this product without any obligation to install the same on products previously
manufactured. Therefore, specifications are subject to change without
notice.
1.75"H x 19.0" W x 13.5"D
44.5mm x 482.6mm x 190.5mm
19.8 lbs., 9.0kg.
¼" TRS (balanced/unbalanced)
Euroblock (balanced/unbalanced)
Multi-Way Binding Post
44k ohms (balanced)
22k ohms (unbalanced)
1V for full power output into 8 ohms
4 x 100Watts/Channel RMS
4 x 140Watts/Channel RMS
2 x 200Watts/Channel RMS
2 x 280Watts/Channel RMS
2 ohms (stereo), short term
4 ohms (bridge), short term
>60dB (typical @ 1kHz)
10Hz to 40kHz, +/- .5dB
>100dB below clipping
<0.05% (typical)
>20V/uS
>100
Toroidal
100VAC 50Hz 1000 WATTS (max.)
120VAC 60Hz 1000 WATTS (max.)
220VAC 50Hz 1000 WATTS (max.)
230VAC 50Hz 1000 WATTS (max.)
240VAC 50Hz 1000 WATTS (max.)
Export units configured for country
of destination.
© 2008 Applied Research & Technology
- 18 -
Advertisement
Table of Contents
