Sla-2 Specifications - Art SLA-2 User Manual

SLA-2 SPECIFICATIONS

Dimensions
Weight
Input Connections
Output Connections
Input Impedance
Input Sensitivity
Stereo Output Power, 8 ohms
Stereo Output Power, 4 ohms
Bridged Output Power, 8 ohms
Stable into:
CMRR
Frequency Response
Hum and Noise
Total Harmonic Distortion (THD)
Slew Rate
Damping Factor
Transformer Type
Power Requirements
ART maintains a policy of constant product improvement. ART reserves the right to
make changes in design or make additions to or improvements upon this product
without any obligation to install same on products previously manufactured. Therefore,
specifications are subject to change without notice.
Applied Research & Technology, a Division of Yorkville Sound
215 Tremont Street
Rochester, NY 14608 USA
(585) 436-2720
(585) 436-3942 (FAX)
www.artproaudio.com
1.75"H x 19.0" W x 13.5"D
19.8 lbs., 9.0kg.
XLR,EUROBLOCK (balanced),
¼"TRS(balanced/unbalanced)
Multi-Way Binding Post
44k ohms (balanced)
22k ohms (unbalanced)
1V for Full Power Output into 8 ohms
200Watts RMS per Channel,
280Watts RMS per Channel
560Watts RMS mono
2 Ohms (stereo)
4 Ohms (mono)
>60dB (typical @ 1kHz)
10Hz to 40kHz, +/- .5dB
>100dB below clipping
<0.05% (typical)
>20V/uS
>100
Toroidal
100VAC 50Hz 1000 WATTS (max.)
120VAC 60Hz 1000 WATTS (max.)
220VAC 50Hz 1000 WATTS (max.)
230VAC 50Hz 1000 WATTS (max.)
240VAC 50Hz 1000 WATTS (max.)
Export units configured for country of
destination.
© 2004 Applied Research & Technology
- 16 -