Art tube mp studio pre amplifiers: user guide (12 pages)
Summary of Contents for Art HEADAMP 6
Page 1
HeadAmp6 PROFESSIONAL SIX CHANNEL HEADPHONE AMPLIFIER OPERATION MANUAL...
Page 2
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST This symbol, wherever it appears, This symbol, wherever it appears, alerts alerts you to the presence of uninsulated you to important operating and maintenance dangerous voltage inside the enclosure. Voltage instructions in the accompanying literature. that may be sufficient to constitute a risk of shock.
The ART HeadAmp6 Professional Six Channel Headphone Amplifier IMPORTANT SAFETY INSTRUCTIONS – READ FIRST ..........1 INTRODUCTION......................4 INSTALLATION......................4 AC Power Hookup ................................4 Analog Audio Connections ..............................4 CONTROLS and JACKS ....................5 Front Panel ..................................5 Direct In Jack..................................5 Master Volume Control................................ 5 Mute L, Mute R, and Mono Switches ..........................
INTRODUCTION The HeadAmp6 is a full-featured six -channel stereo headphone amplifier that includes six auxiliary inputs to allow separate mixes on each headphone channel. Each output channel also features a dual function Balance control which will pan between Left & Right sides of the main signal bus, or vary the Mix between the main signal bus and the Auxiliary input for that respective channel.
CONTROLS and JACKS Front Panel FIGURE 1 - Master Volume, Direct In, and Channel One Direct In Jack The 1/4-inch TRS (Tip, Ring, Sleeve) jack on the front panel provides a stereo unbalanced input which, when used, will override the rear panel balanced inputs. This input is useful for when you want to temporarily insert a different main input signal from what is connected to the rear inputs, or simply make an unbalanced TRS style connection to another headphone output source.
Balance Control This control provides one of two functions depending on whether there is a plug inserted into the stereo AUX IN for a particular channel. With no plug inserted into the AUX IN jack, the control will vary the Left / Right balance of the main signal bus feed to the channel.
FIGURE 3 - Rear Panel Headphone Outputs Stereo Headphone Outputs These stereo TRS jacks are the main outputs for each channel of the headphone amplifier. They are wired in parallel with the corresponding output jacks on the front panel. Either front panel, rear panel, or both front and rear panel outputs can be used simultaneously to drive headphones or they can be used as feeds to additional headphone amplifiers in a distributed audio network.
DIRECT IN jack only feeds its respective HeadAmp6 unit directly.) Connect headphones, or leads to additional headphone amps, (like the ART HeadAmp 4) to either the front or rear panel HEADPHONE OUTPUT jacks (or both) using stereo 1/4-inch TRS plugs.
2) If you believe the ART unit is at fault, go to www.artproaudio.com. You may contact Customer Service for more assistance, or directly request a Return Authorization for service in the “resources” area of the website.
Ref: 0 dBu = 0.775VAC RMS ART maintains a policy of constant product improvement. ART reserves the right to make changes in design or make additions to or improvements upon this product without any obligation to install the same on products previously manufactured.
Need help?
Do you have a question about the HEADAMP 6 and is the answer not in the manual?
Questions and answers